SMC tanks

The SMC tank is assembled on site from the SMC molded plate, seal material, metal structure and piping system. Gives great convenience to design and construction. The general water tank is designed according to the standard, and the special water tank needs to be specially designed. According to user needs can be assembled 0.125-1500 cubic meters of water tanks. If the original water tank needs to be replaced, there is no need to transform the house and the adaptability is very strong. Specially developed styling product sealing tape, the sealing tape is non-toxic, water-resistant, elastic, permanent deformation, tightly sealed. The tank has high overall strength, no leakage, no deformation, and convenient maintenance and inspection. The SMC molded water tank board uses glass fiber reinforced materials and is molded using a high temperature, high pressure process. The plate sizes are three standard plates of 1000×1000, 1000×500, and 500×500, and the plate thickness is 6mm, 8mm, 10mm, 12mm, 14mm, and 16mm. Performance and cleanliness performance Chemical and toxicological tests were conducted by the Institute of Environmental Health and Hygiene Engineering of the Chinese Academy of Preventive Medicine and the Beijing Sanitary and Anti-epidemic Station. The evaluation was as follows: No toxic and prohibited compounds were found in the provided synthetic materials; On-line color identification and volatiles detection results, SMC tank water soaking solution did not find high levels of compounds with high toxicity; Toxicity test: SMC tank water soaked animal test results showed no acute and cumulative toxicity. The tank soaking water quality meets the national drinking water standard (GB5749-85) and Japan's high water quality standards. Therefore, use is safe and reliable. 2. Specification and performance Specifications of SMC molded veneer (need to negotiate with other specifications): 1000x1500mm, 1000x1000mm, 1000x500mm, 500x500mm. Thickness is 5mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm; 5mm thickness of the single board for the tank cover. SMC Molded Water Tank Implementation of National Building Material Industry Standard: (JC658.1-1997)